Global Machinery Company SHS2400 Manual de usuario descargar pdf (Pagina 9)

Operation of the shredder

Starting the motor

WARNING. Ensure that the shredder is empty before

starting the motor.

1. Connect the shredder power cord to an appropriate

extension cord and plug it in to the mains power.

2. To start the motor, first make sure the yellow switch is in

the forward position and then press the green section of

the on/off switch (2) marked with an

Stopping the motor

Stop the motor by pressing the

red section of the

on/off switch (2) marked

WARNING. Do not feed in any

material after the motor has

been stopped. This will get

caught in the machine and can

make restarting impossible.

Changing direction of rotation

WARNING. The rotation direction switch can only be used if

the shredder is switched off.

Position

For forward action turn the

forward/reverse switch to the

right. The cutting blades pull

the material in and

shred it.

Position

The cutting blades run in the

opposite direction and release

the clogged material.

Press the green on switch

(2) after you have moved the

forward/reverse switch to the

left

The cutting blades run now

in the opposite direction.

If you release the on/off

switch the shredder will stop

automatically.

Overload protection

The shredder is equipped with a built-in motor protection

which prevents the motor being overloaded.

In the event of overloading, the current is broken and the

main switch is turned off

automatically .

Disconnect shredder from

power supply and move the

direction of rotation switch to

O position before attempting

to unblock any jams.

Allow at least 5 minutes for

the motor to cool down.

1 2 3 4 5 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios

Global Machinery Company SHS2400 Manual de usuario Pagina 9

Comentarios a estos manuales